Everything for Your Home's
Beauty, Comfort & Convenience 384-2123
704 Jamestown St, Columbia
Dr. Ronald P. Rogers
Support for your body's natural healing capabilities
Click here for details
Click here for information
Real Estate & Auction Co.
Duo County Telecom
Now Available Through
Your Cable Service!
GUN & PAWN
What's Going On
Info about the
Janice Holt Giles
and Henry Giles Society
Columbia Gas Dept.
GAS LEAK or GAS SMELL
24 hrs/ 365 days
270-384-2006 or 9-1-1
Call before you dig
Directory of Churches
phone numbers and more
for churches in Adair County
Kentucky Afield Outdoors: Choosing a first shotgun
Despite popular belief, .410 is not the best first shotgun choice- in reality, he says, it is the worst first shotgun
Click on headline for complete article with photo(s)
By Lee McClellan, Associate Editor
Kentucky Afield Outdoors magazine, KY Fish & Wildlife
FRANKFORT, KY- My first shotgun was an old .410-gauge Mossberg with a bolt action and pistol grip that once belonged to my grandmother. A decent squirrel gun, yet working the bolt to get off three shots at incoming doves was nearly impossible for me when excited. Doves flying nearby had little to fear when I shouldered that old .410.
Many think a .410-gauge is a good beginner's shotgun because of its lighter weight and reduced recoil, but in reality, it is the worst choice.
"I don't recommend them for a first shotgun," said Bill Balda, hunter education supervisor for the Kentucky Department of Fish and Wildlife Resources. "They are an expert's gun. You are much better off with a 20-gauge semi-automatic. The semi-automatic action soaks up much of the recoil. You get much more shot in a 20-gauge shotshell."
Balda explained the extra shot in a 20-gauge shotshell than in a .410-gauge makes it much more forgiving. A typical .410 gauge shotshell holds 1/2-ounce of shot which correlates to 175 pellets of No. 7 1/2 shot. A regular game load in a 20-gauge shotshell holds 7/8-ounce of shot and 306 pellets of No. 7 1/2shot. You do the math.
Plus, with a semi-automatic shotgun, three trigger pulls gets you three shots quickly if you need them. Price, however, may be a deterrent to a semi-automatic shotgun. They are a large cost commitment, especially for someone just dipping their toes into the shotgun sports.
A single shot shotgun runs about $150 brand new, with used ones available at half that price. An average semi-automatic shotgun costs several times more than a single shot. Both though, with proper care, should last a lifetime. My grandmother's .410 still shoots great today.
"Single shots are effective and they are good beginner guns," Balda said. "Single shots are hinge actions and easy to use. They are safe to handle for beginners as they are easy to see if they are loaded. Even with a shotshell in it, the gun can't go off with the action open."
These attributes make single shots a good option for a youth hunter. A single shot also teaches young hunters shot discipline. You are much less likely to take impractical, out-of-range shots when you have just one try at the target.
"Single shots are lighter and easy to carry in the woods," Balda said. However, the light weight brings with it more pronounced recoil or "kick." Balda recommends a low recoil shotshell for single shots.
A pump-action shotgun, where the shooter manually pulls the action to cycle a shotshell, falls in price between single shots and semi-automatics. New ones from established manufacturers run roughly $300 - $400, but some from less well known manufacturers go for as little as $200.
"A pump is really reliable and almost any load will shoot in them," Balda said. "I think as a first shotgun, they are a little much to keep up with from worrying about pumping the action for the next shot."
Pump-action shotguns perform for decade after decade with routine maintenance. "They wear like iron," Balda said. "If money is an issue, a pump is a good choice for a repeating shotgun."
Proper fit is an important consideration for buying a first shotgun as well. "For the average person, length of pull is most important," Balda said.
The length of pull is the distance between the trigger and the butt end of the stock. A simple way to gauge length of pull is to place the butt of the stock of the unloaded shotgun in the crux of your arm, fold your arm into the gun and place your first finger on the trigger.
"You should be able to get the first notch of your finger on the trigger," Balda said. "If you can't, the stock is too long. If you get to the second notch of your finger, then it is too short."
Installing a recoil pad lengthens the stock and often remedies one that is too short. He recommends taking the shotgun to a gunsmith for a proper fitting if the stock is too long.
Most manufacturers offer youth model shotguns with shorter stocks. These make excellent choices for many female shooters as well. Don't force a shooter to fit a certain shotgun, have the shotgun fit the shooter.
Also, mount the shotgun you are considering to your shoulder and place your cheek firmly on the gun stock as if ready to fire. "All you should see is the bead on the front of the barrel," Balda said. "If you are having trouble with that, mount the gun higher on your shoulder."
Consider these options for a first shotgun. The most important thing is the end result.
"Look straight down the barrel at the target and paint it out of the sky," Balda said.
Author Lee McClellan is a nationally award-winning associate editor for Kentucky Afield magazine, the official publication of the Kentucky Department of Fish and Wildlife Resources. He is a life-long hunter and angler, with a passion for smallmouth bass fishing.
This story was posted on 2014-08-07 17:43:42
Printable: this page is now automatically formatted for printing.
Have comments or corrections for this story? Use our contact form and let us know.
To sponsor news and features on ColumbiaMagazine, please use our contact form.